CREALITY Official engagement report
@Creality3dP - 99K followers on X
Measured over 56 original posts from a 30-day window, last computed on September 11, 2026.
Engagement
A typical post picks up 22 interactions against 99K followers, an engagement rate of 0.022%. Measured over 56 original posts, its engagement rate beats 27% of 16,409 tracked accounts of a similar size, which puts it in the middle of its size range rather than at either end. Posts are seen about 3.1K times each, and 0.698% of those impressions turn into an interaction. That is about 3.10% of the follower count, which is the gap between an audience on paper and an audience in a timeline. Posting runs at about 1.9 posts a day over the last 30 days, with activity on almost every day in the window. Most posts go out around 14:00 UTC, and Thursday is the busiest day of the week. Of the 56 posts sampled, 100% carry an image or video and 25% link out. The account's strongest tracked post pulled 284 interactions, about 13x its own typical post. Recurring topics include #creality, #3dprinting, #3dprinter.
Measured over 56 original posts from a 30-day window, last computed on September 11, 2026. Recurring tags: #creality, #3dprinting, #3dprinter.
Compared with accounts its own size
CREALITY Official's engagement rate beats 27% of the tracked X accounts closest to it in follower count (16,409 accounts, accounts of similar size (decile 7 of 10)). A percentile is spread evenly by construction, so 50 really is the middle of that group and 90 really is its top tenth.
On engagement per impression rather than per follower it beats 31% of the same group. When those two numbers disagree, the gap is about how far its posts travel rather than how people react to them.
Where this sits in the catalog
At 0.022%, CREALITY Official sits above the 10th percentile of the 166,561 accounts in this comparison. That places it in the bottom 25% band, which runs below 0.022%.
Show the percentile table
| Percentile | Engagement rate |
|---|---|
| 10th percentile | 0.003% |
| 25th percentile | 0.022% |
| 50th percentile | 0.13% |
| 75th percentile | 0.612% |
| 90th percentile | 2.35% |
| 99th percentile | 82.6% |
This ruler is the whole measured catalog, not a size-matched group: it shows where the raw rate falls across every account we can measure, all of which are large. For a like-for-like comparison, read the size-band percentile above instead. See how the bands are built
Posting timing
This account posts most often around 14:00 UTC, and Thursday is its busiest day of the week. The bars below are the catalog-wide pattern, with this account's own busiest slot marked. They do not show how this account performs at each hour: we keep one aggregate per account, not one per hour, so that measurement does not exist in our data.
Show engagement by hour posted, utc as a table
| Hour (UTC) | Vs author median | Posts |
|---|---|---|
| 00:00 UTC | -1% | 89K |
| 01:00 UTC | -2% | 90K |
| 02:00 UTC | -3% | 88K |
| 03:00 UTC | -4% | 94K |
| 04:00 UTC | -5% | 76K |
| 05:00 UTC | -4% | 75K |
| 06:00 UTC | -5% | 86K |
| 07:00 UTC | -5% | 93K |
| 08:00 UTC | -4% | 108K |
| 09:00 UTC | -4% | 124K |
| 10:00 UTC | -3% | 129K |
| 11:00 UTC | -3% | 141K |
| 12:00 UTC | -3% | 154K |
| 13:00 UTC | -3% | 167K |
| 14:00 UTC | -4% | 173K |
| 15:00 UTC | -2% | 176K |
| 16:00 UTC | -3% | 171K |
| 17:00 UTC | -3% | 159K |
| 18:00 UTC | -2% | 149K |
| 19:00 UTC | -2% | 141K |
| 20:00 UTC | -1% | 131K |
| 21:00 UTC | 0% | 116K |
| 22:00 UTC | -2% | 100K |
| 23:00 UTC | -1% | 90K |
Show engagement by day of week as a table
| Day | Vs author median | Posts |
|---|---|---|
| Sunday | +5% | 393K |
| Monday | +1% | 483K |
| Tuesday | -2% | 520K |
| Wednesday | -3% | 472K |
| Thursday | -2% | 430K |
| Friday | -3% | 447K |
| Saturday | +2% | 393K |
Formats this account uses
Its own posting mix on the left, and what each of those formats does across every account we track on the right. Only formats where the effect clears our publish test appear here, so an empty row is a format we could not measure rather than one that does nothing.
| Format | This account | Catalog effect | 95% interval | Accounts behind it |
|---|---|---|---|---|
| Image or video | 100% of posts | +111% | +108% to +115% | 34K |
| Outbound link | 25% of posts | -41% | -42% to -40% | 32K |
| Typical length | - | +15% | +14% to +16% | 32K |
- 100% of this account's sampled posts carry an image or video. Across the catalog, posts with an image or video run 111% above the same accounts' other posts.
- 25% of its posts carry a link off X. Across the catalog, posts with an outbound link run 41% below the same accounts' other posts.
- Its average post runs 330 characters, which falls in the over 280 characters band. Across the catalog, posts over 280 characters run 15% above the same accounts' other posts.
These are catalog-wide differences applied to this account's own posting mix, not a measurement of how each format performs for this account specifically. We keep one median per account, not one per format per account, so the second thing is not something this data can tell you.
Best tweets
- Jul 20, 202613x their median
🏆 CHAMPIONS! ⚽🎉 The trophy is theirs. 🏆 🎁 Want to celebrate with us? ✅ Follow @Creality3dP ❤️ Like this post 💬 Tag 3 friends in the comments 🎁 Prize Pool: 🖨️ 1 winner × Creality K2 👟 1 winner × 3D-printed shoes 📢 Winners announced: July 24 🌍 Winners will be selected across all social media. Celebrate the champions. Win big. ⚽🏆 #MakerCup #Creality #WorldCup #Giveaway #Champion
- Sep 9, 202612x their median
🔥 It’s time for Creality K3 AMA! Got tons of questions? We’re ready to answer everything about Creality K3! Drop your questions below in the comments. 🎁 We’ll reply to top questions & pick 2 lucky winners across all platforms on September 30th! Each winner gets a Creality SpacePi X4. How to join: ✅ Follow us ✅ Like this post ✅ Comment your questions below 👉 Explore K3 via the link here: https://t.co/30VzB2jBjI #CrealityK3 #K3 #Creality #KliTek #3DPrinting #AMA
- May 30, 20269.9x their median
Nozzle changer. Game changer. Meet KliTek™ | Creality's Next‑Gen Nozzle Changing ⚡ Next‑Gen Nozzle Changing: Ultra‑fast 5s nozzle swap, virtually zero waste, up to 4.5× lower maintenance costs. 🧩 TPU Printing Made Easy: Print multi‑color, multi‑material & multi‑hardness TPU in one go — supports ultra‑soft TPU down to 80A. 🎨 CMYK Full‑Spectrum Printing: Mix cyan, magenta, yellow & white/black to unlock the full color gamut with zero compromise. 🛠️ Multi‑Diameter Nozzle Coordination: 0.4mm for crisp details | 0.8mm for fast infill — perfect quality + speed balance. K3 is coming Q3 2026 — stay tuned!🚀 👉 Learn more: https://t.co/213ErEjysH #K3 #KliTek #MakeWithCreality #12YearsOfCreality #Creality #3DPrinting
- Sep 4, 20266.5x their median
Meet Creality K3 ✨ Beyond Nozzles. Conquer Materials. K3 is supercharged with KliTek™ 🔹 4.8s nozzle changes 🔹 Multi-material in one 🔹 Up to 5x faster 🔹 Waste-free Unfolds an all-new chapter in multicolor and multi-material printing. Learn more: https://t.co/30VzB2jBjI #CrealityK3 #K3 #Creality #KliTek #3DPrinting #NewProductLaunch
- Sep 3, 20264.1x their median
🚀 Meet SPARKX i8: The Fastest, Most Filament-Efficient Four-Color 3D Printer Say goodbye to prime towers and slowed prints. SPARKX i8 delivers lightning-fast results with zero purge waste. TRUE MULTICOLOR INCOMING. 🔥Highlights: 5x Faster Multicolor Printing <1s Filament Switching "0" Purge Waste While Printing ＜1mm Shared Filament Path Fastest Prints. Least Waste. Unlimited Creations. Learn more here: https://t.co/wTCl8O2aLf #Creality #SPARKXi8 #QuarTeks #3DPrinting #3DPrinter
- Aug 5, 20263.6x their median
The best 3D-printed tools you'll actually use. 🔥 Printer: SPARKX i7 Filament: Creality PLA RFID Video by suvidi3d Find these models on Creality Cloud: 14502448 | 57155160 | 42150153 https://t.co/BUYeRQzmXE
- Sep 5, 20263.0x their median
🏆 Creality K3: The IFA Innovation Award Honoree In the category of Best in IFA Next & Emerging Technologies An incredible honor for this recognition at IFA 2026 🙌 Learn more: https://t.co/SDkjrPVeQe #Creality #CrealityK3 #K3 #IFA2026 #CrealityIFA2026 #3DPrinting https://t.co/ambgaT3TOC
- Sep 6, 20262.8x their median
SAME MODEL. DIFFERENT MULTICOLOR EXPERIENCE. Multicolor printing shouldn’t mean more waiting and more filament waste. In this side-by-side test, we printed the same Mini Stegosaurus on the SPARKX i8 and a traditional 3D printer, and the result was striking!🚀 ⏱️ Nearly 7 hours saved on a single print ♻️ A visibly dramatic reduction in filament waste Same model. Same multicolor task. A much more efficient result. Which matters more to you: faster multicolor printing or less filament waste? Learn More & Stay Updated 👉 https://t.co/wTCl8O1CVH
- Sep 7, 20262.5x their median
🧩 The right infill can make your prints stronger, faster, or both. Learn how to choose the best infill pattern in Creality Print! 🚀 Follow @Creality3dP for more easy 3D printing tips. 💡 Printed on SPARKX i7 🖨 Shoutout to galfra3d Filament: Creality Hyper PLA RFID https://t.co/8kXkdDsiXU
- Aug 30, 20262.3x their median
HELP! Our 3D-printed toys are being grabbed! 🎯 The claw is coming down… Which little toy will get picked? Want to try it yourself? Visit us at IFA 2026 and take your shot at the claw machine! September 4–8, 2026 Messe Berlin, Germany Booth H20_143 Creality Cloud Model ID: 16207242
Ranked by total interactions across everything we have tracked for this account, which is a longer history than the 30-day window the rates above use. The multiple compares each post to this account's own median.
Recurring topics
The most frequent hashtags in the sampled posts. They describe what this account writes about; they are not a performance signal, and the catalog-wide breakdown on the hub shows how little hashtag count moves.
Buy or sell Twitter (X) accounts - escrow-protected
PlayerSells is an escrow marketplace for Twitter (X) accounts. Every deal is protected, with no middleman risk.
Reading these numbers
A typical post picks up 22 interactions against 99K followers, an engagement rate of 0.022%. Measured over 56 original posts, its engagement rate beats 27% of 16,409 tracked accounts of a similar size, which puts it in the middle of its size range rather than at either end. Posts are seen about 3.1K times each, and 0.698% of those impressions turn into an interaction. That is about 3.10% of the follower count, which is the gap between an audience on paper and an audience in a timeline. Posting runs at about 1.9 posts a day over the last 30 days, with activity on almost every day in the window. Most posts go out around 14:00 UTC, and Thursday is the busiest day of the week. Of the 56 posts sampled, 100% carry an image or video and 25% link out. The account's strongest tracked post pulled 284 interactions, about 13x its own typical post. Recurring topics include #creality, #3dprinting, #3dprinter.
- What is CREALITY Official's engagement rate on X?
- CREALITY Official (@Creality3dP) has an engagement rate of 0.022%, based on the median interactions across 56 original posts from the last 30 days against 99,315 followers. Replies, reposts and quote-posts of other people are excluded from that sample.
- Is that a good engagement rate?
- At 0.022%, CREALITY Official sits above the 10th percentile of the 166,561 accounts in this comparison. Those comparison accounts are all large ones, because our scanning cadence is weighted towards big accounts, so this is a ranking among peers of similar scale rather than a ranking across X.
- Does @Creality3dP have real engagement?
- Its engagement rate beats 27% of the tracked X accounts closest to it in follower count (16,409 accounts), which puts it in the middle of its size range group. Ranking inside a size band matters because engagement rate falls as accounts grow, so a raw rate would mostly re-measure the follower count. It is a starting point for a look at follower quality, not a verdict on it.
- When does @Creality3dP post?
- Most posts go out around 14:00 UTC, and Thursday is its busiest day, at roughly 1.9 posts per day across the measured window.